How To Adjust Coilovers With Spanner Wrench

Drive like a pro with accutune. 4.9 out of 5 stars.

MP30 Flywheel Puller for vintage Yamaha XS650 models

This does not hurt the coilover or the allen wrench (unlike the spanner wrench).

How to adjust coilovers with spanner wrench. This is a replacement spanner for ground control coilover kits. 5% coupon applied at checkout. That is why i put 2 ends on our new spanner wrench that is now included in the kit honestly i hardly ever use the hook end but people have a mind set.

When i lifted the front end off the ground to take the weight off the coilover and adjust them like they recommend, the uca is 100% directly in front of the adjustment collar and there is no way to get their spanner wrench on it and turn it far enough to get at it a second time (basically i was able to get it on there once directly behind the uniball and make a very small adjustment but the uca keeps it from. 99 ($6.50/count) 10% coupon applied at checkout. Also includes a square hole for 1/2 inch drive socket wrench, 17mm hex for most damper top nuts, and tip extension for use to hold coilover in place while tightening/ loosening locks.

But said it was difficult. Once loose, spin collar b by hand down the length of the coilover. The wrench has a compact, low profile design that makes it easy to use in the tight clearances of your trucks wheel wells.

I don't believe anyone makes a spanner wrench for them due to the design of the collars, but i could be wrong 4pcs coilover wrench shock spanner wrench set universal shock tool adjustment tool for most coil over. The spanner wrench loosens and tightens coil spring retainer nut.

I have a adjustable spanner wrench i used for my bmw back in the day (need to find it) but curious if icons are different in hole size? This spanner is included only in certain gc coilover kits, so if your gc coilover kit did not include a spanner, then you do not need to buy this. While it work on many coilovers we have tested it may not work on every single coilovers out there so please take look at the picture compare to the coilovers.

Shop fox spanner wrenches for coilovers and piggy back bridges, and save with free shipping on orders over $150. Make sure the spring perch (b) and locking collar (c) are locked by using the spanner wrenches and turning them in opposite directions so they lock against each other. This aluminum spanner wrench allows you to adjust your.

The most common misconception why people think they may need a spanner, is that they are tilting the car on its side to adjust the collars,. Our coilover spanner wrench is easy to use and takes up very. I read someone used a 8mm allen.

We recommend you remove the coilover system from the vehicle to adjust ride height, as it is necessary to use force when tightening the locking collar on the lower mount. Once youve lowered or raised your vehicle to the desired height, hold the top adjustment collar tight as you tighten the lower adjustment. Cut from thick plate steel, this coilover adjustment wrench is built to withstand years of use.

Adjustable sleeve coilover spanner wrenches are compatible with many aftermarket adjustable coilovers. Coilover adjustment tool spanner wrench for aftermarket coilover black/red. Fixed pin spanner wrench by afe.

I like the cut off screw driver tool it often works better than a typical hook style spanner wrench. Tested on and compatible with skunk2 adjustable sleeve coilovers, dme coilovers, function form type 1 and type 2 coilovers, cusco, hks, tein, truhart coilovers, apexi,d2, megan etc You can put the small end of the allen in the collar or the long end depending on if you want to raise or lower the collar and use the rachet with the deep socket for leverage and stability.

If you own ridetech coilovers, get one of these spanner wrenches for adjusting spring preload and therefore ride height. Op those don't look like they will work with the 2.0 coilovers, the collars on those are more of a hand grip design in which case the coils would need to be compressed in order to adjust them. Use these to adjust the collars on your yonaka coilovers.

Let that stuff soak in. Before i buy the icon spanner wrench to adjust my coilovers is there alternative way of doing so? You start by loosening up the lower collar with a spanner wrench before adjusting the upper adjustment collar with another spanner wrench.

Lowrider Hydraulics two side dump Kit, chrome finished